Safety blow guns shown on this page have safety tips which prevent buildup of tip pressure in the event the outlet is obstructed or “dead ended." In compliance with OSHA 1910.242b and 1910.95 requirements when used on an air line of 150 PSI or less. Use personal protective equipment, safety goggles, chip guarding barrier screens and ear protection.
1/4" NPTF inlet and 1/8" outlet.
Tamper-proof tip swivels and cannot be removed. Tip pressure will not exceed 30 PSI when inlet pressure is 150 PSI or less. Installed restrictors reduce tip pressure to 30 PSI. 1 pack.
Cross-Drilled Tip Bypass. Features solid tip construction. Restrictors reduce tip pressure to 30 PSI. Tip pressure will not exceed 30 PSI when inlet pressure is 150 PSI or less. 1 pack.
Personal Safety Blow Gun. Use in applications where compressed air makes human contact. Same as 204-30 (above) except tip pressure will not exceed 10 PSI. 1 pack.
Strata-Flo Blow Gun. Special design concentrates air into a powerful stream. No through-hole design prevents dangerous pressure buildup and reduces air turbulence making it much quieter than most blow guns. 1 pack.
Adjustable Pocket Blow Gun. Knurled tip provides positive grip. Ten packs are available in Amflo also. 1 pack.
216D* Aro Series
217D* Automotive Series
- 219D* Industrial Series
Standard Safety Blow Gun. Slotted venturi tip prevents pressure buildup. Venturi effect draws more air than standard blow guns. 1 pack.
Safety Blow Gun with 3" Extension. Drilled venturi prevents pressure buildup. 1 pack.
- 204-30-3D*
204-30-3 (boxed)
Safety Blow Gun with 6" Extension. Same as 204-30-3D, except has 6" extension. 1 pack.
Safety Blow Gun with 12" Extension. Same as 204-30-3D, except has 12" extension. 1 pack.
Variable Flow Star Tip Blow Gun. Innovative design lets trigger control air flow for all types of jobs. Star tip prevents dangerous pressure buildup and is very quiet. Brass inlet and valve. Swiss Made. 1 pack.
- 204-30STD*
204-30ST (boxed)
| WARNING: Blow guns listed above are designed for use on regulated compressed air lines only. Inlet pressure must not exceed 150 PSI. These safety blow guns utilize special tips that prevent pressure buildup if tip is blocked or “dead ended.” Complies with OSHA 1910.242b and 1910.95 requirements when used on a regulated air line of 150 PSI or less. Use personal protective equipment, (safety goggles) and/or chip guards, barrier screens and ear protection. Failure to follow these specifications and directions exactly may result in personal injury and/or property damage. |
Standard Series Blow Guns. 1/4" NPTF inlet and 1/8" NPTF outlet. Rugged construction with hang hook. Accepts a full range of accessories. 1 pack.
Rubber Tipped Blow Gun. Provides leak proof seal for blowing out lines. Rubber tip is excellent for body shops as it will not mar painted surfaces. 1 pack.
Deluxe Blow Gun Kit. Popular kit containing standard blow gun and 4 tip accessories in display package. 1 pack.
Vapor Spray Gun. Use on water lines to spray plants and produce.
Economy Blow Gun. Press side to regulate air flow. Excellent for inflating balloons. 1 pack.
CAUTION: Blow guns listed in this section, above, do not have a safety bypass to prevent tip pressure buildup in the event of blockage. These blow guns comply with the requirements of OSHA 1910.242b when used on a regulated line of 30 PSI or less. Use male threaded plug (1/4" NPT). Make sure plug is securely tightened to blow gun. Do not retap or modify the threads of the blow gun for a nonstandard plug. Do not point blow gun tips at people or animals. Keep tip pointed away from your body. Always wear eye and ear protection when using blow guns. Failure to follow these specifications and directions exactly may result in personal injury and/or property damage. |
Heavy-Duty Series Blow Guns |
Angle Tip Blow Gun. Heavy-duty construction and rubber tip. Excellent for blowing out automatic transmissions. 1 pack.
Heavy-Duty Blow Gun. Built for rugged applications. Extra strong casting provides long service life. Has 1/4" NPTF inlet and 1/8" nozzle thread. 1 pack.
Heavy-Duty Blow Gun. Use in construction and other rugged applications. Standard 1/8" NPT nozzle thread. 1 pack.
Booster Blow Gun. Delivers extra wide spray pattern. Additional air is drawn through holes around nozzle. 1 pack.
CAUTION: Blow guns listed in this section, above, do not have a safety bypass to prevent tip pressure buildup in the event of blockage. These blow guns comply with the requirements of OSHA 1910.242b when used on a regulated line of 30 PSI or less. Use male threaded plug (1/4" NPT). Make sure plug is securely tightened to blow gun. Do not retap or modify the threads of the blow gun for a nonstandard plug. Do not point blow gun tips at people or animals. Keep tip pointed away from your body. Always wear eye and ear protection when using blow guns. Failure to follow these specifications and directions exactly may result in personal injury and/or property damage. |
Blows air/liquids. Excellent for cleaning engines. Complete with 8 feet plastic tubing. 1 pack.
Tubing not included. 1 pack.
Blows air/liquids to clean auto engines. Contains control valve to regulate density of mist. Complete with 8 feet plastic tubing. 1 pack.
Best Siphon Spray Gun with Control Valve. Tubing not included. 1 pack.
Hydro-Blast Cleaning Spray Gun and Siphon. Combines compressed air with water pressure to blast away dirt and grime. Includes 3" and 15" extension, garden hose adaptor and 6 feet of tubing. 1 pack.
Best Hydro-Blast. This rugged tool is the answer for removing dirt, grime and grease. Combines water and air pressure to quickly clean yet will not harm finishes. Includes rubber grip for hot water use. 1 pack.
Hydro-Blast Accessory Kit. Includes a 17" and 9" extension, one siphon attachment, 6 feet of plastic tubing and flushing adaptor. Use with 2000G (above). 1 pack.
CAUTION: Blow guns listed in this section, above, do not have a safety bypass to prevent tip pressure buildup in the event of blockage. These blow guns comply with the requirements of OSHA 1910.242b when used on a regulated line of 30 PSI or less. Use male threaded plug (1/4" NPT). Make sure plug is securely tightened to blow gun. Do not retap or modify the threads of the blow gun for a nonstandard plug. Do not point blow gun tips at people or animals. Keep tip pointed away from your body. Always wear eye and ear protection when using blow guns. Failure to follow these specifications and directions exactly may result in personal injury and/or property damage. |
Blow gun tips and extensions on this page have 1/8" NPT male threads.
Read warning statement below before using blow gun accessories.
Standard Chrome Plated Extensions. 1/4" tubing. 1 pack.
Five Pack of Blow Gun Tips. Popular assortment of 5 stainless steel tubes with chrome plated, brass fittings.
Replacement Needles
200NT-1 .134"
200NT-2 .095"
200NT-3 .065"
200NT-4 .050"
200NT-5 .042"
Flexible Metal Extensions. Use for air or coolant lines.
Safety Extensions. Extensions have safety bypass and cannot be dead ended. 1 pack.
204E6 6"
204E12 12"
204E24 24"
204E36 36"
Standard Replacement Tip. Use on Amflo blow guns 200 and 205, and on Camel 51-122. (card/1)
Replacement Rubber Tip Nozzle. For making air tight connections for blowing out lines, or cleaning delicate molds where a metal tip might scratch the mold.
202D (Display pack)
202 (Boxed/10)
Replacement Vapor Spray Tip.
Safety Nozzle. Additional air is drawn through side holes and prevents buildups. Replacement for Amflo 208 and Camel 51-342. (Amflo design is slotted).
Strata-Flo Tip. Improves performance, reduces air consumption and noise. 1 pack.
Siphon Nozzle Tip. Use with any blow gun having 1/8" NPT female nozzle port. Barbed extension will fit tubing or hose with 1/4" ID.
Siphon Nozzle with Adjustable Spray Valve. Converts any 1/8" NPT blow gun to an adjustable spray gun. Barbed extension will fit tubing or hose with 1/4" ID. (Replacement for 223T).
Standard Blow Gun Valve Repair Kit. Contains valve stem, O-rings, spring and nut. 1 pack.
Heavy Duty Blow Gun Valve Repair Kit. Contains valve stem, O-rings, spring and nut. 1 pack.
WARNING: Do not use needle tip extension on compressed air lines where air pressure exceeds 30 PSI. Do not block the tip. Always wear eye protection and personal protective equipment when using blow guns. Do not point tip at people or animals when using compressed air, keep the tip pointed away from your body. Failure to follow these specifications and warnings exactly may result in personal injury and/or property damage. |
*Display Package
Air Flow Data |
| To assist you in selecting the blow gun best suited for your application refer to the chart below. It shows a comparison of actual compressed air consumed in CFM, to air delivered at tip end in CFM. Flow data is based on inlet pressure of 100 PSI. |
Amflo No. | Air (CFM)
Consumed | Air (CFM)
Delivered |
200 | 8 | 8 |
201 | 11 | 11 |
205 | 9 | 9 |
211 | 10 | 10 |
204-30A | 8 | 11 |
208 | 11 | 16 |
226 | 26 | 80 |
212 | 6 | 40 |
206-30 | 14 | 21 |
